Skip to content
TemperancevilleDoor Specialists
Open 24/7(289) 802-2396Open 24/7
Four long coiled garage-door springs on a concrete floor, three black with metal end cones and one rusty spring broken in two.

Garage Doors in Aurora, OntarioLocks, latchesand doors without openers.

Not every garage has an opener. Manual doors rely on a slide bolt or a T-handle lock that has to line up with the track. We repair and align those, replace worn handles and cylinders, and keep the door secure without a motor involved.

Call (289) 802-2396

Open 24/7 · Aurora

What happened?

Tap the closest match.

Not every garage has an opener. Manual doors rely on a slide bolt or a T-handle lock that has to line up with the track. We repair and align those, replace worn handles and cylinders, and keep the door secure without a motor involved.

Technician in a brown cap driving a screw into a vertical door track with a yellow cordless drill, beside a workbench.
Technician in a cap fastening a small black plastic housing to a white frame beside a glass door, with a screwdriver.

Balanced, quiet and ready for winter.

Glass doors need a level opening, solid framing and precise track alignment, because any twist shows in the glass lines. We check the header and jambs, set the tracks carefully and adjust the balance for the door's weight, which differs from a steel door of the same size. The result is a door that looks as sharp as it did in the showroom.

A garage door belongs to the architecture. Its movement belongs to your everyday life. We bring both into the conversation.

21years in business

24/7open every day

  • A technician who talks. You hear what we are checking and why, in real time. Ask anything; the explanation is part of the job.
  • Mess that leaves with us. Debris, packaging and the old spring go with us. Your floor and your car look the same after as before.
  • Your decision, informed. We put the choices on the table with their pros and cons. Whether to repair, upgrade or replace stays with you.
Call (289) 802-2396
Technician in a cap and safety glasses fitting a paneled garage-door section against the track hinges, with a drill on the floor.
Opened garage-door opener motor with a green circuit board on a workbench beside its white cover, two remotes and screwdrivers.
Technician kneeling at a garage opening, pushing a black rubber seal into the metal jamb, with a red utility knife nearby.

An entrance.
Not an
afterthought.

1/3Garage Door Opener Replacement

You swapped the old wooden door for a heavier insulated steel one, and the twenty-year-old opener that was kept has never settled. It strains on the way up, stops partway on cold mornings, and the rail shudders with every cycle.

Garage Door Opener Replacement

2/3Garage Door Opener Diagnosis and Repair

The door stops partway up for no reason, or opens fine and then refuses the next time. Some days the keypad works and some days it does not. The opener is the one that came with the house twenty-odd years ago, and nobody has the manual.

Garage Door Opener Diagnosis and Repair

3/3Garage Door Tune-Up

Twice this week the door started closing, stopped a metre from the floor and reopened on its own. One of the little sensor lights near the floor blinks instead of glowing steady, and the wall button has to be held to close it.

Garage Door Tune-Up

Springs

Springs & Hardware

Torsion and extension springs, lift cables, drums and bearings. When any of these wears, the opener strains and the door becomes unpredictable. We restore the balance so everything else can relax.

Drawing of a sectional garage door seen from inside the garage, partly raised, with four numbered parts: 1 the torsion spring above the door, 2 a lift cable running down the door edge, 3 a roller in its track, 4 the safety sensors either side of the opening and the beam between them. 1 2 3 4
  1. Torsion Spring Replacement

    You heard a sharp bang from the garage, and now the opener hums for a second and gives up.

  2. Garage Door Cable Replacement

    After years of slushy winters the cables look thinner near the bottom brackets, with rust streaks running down the door where they attach.

  3. Garage Door Roller Replacement

    The door is the one the builder installed and has never had a part changed.

  4. Photo-Eye Sensor Alignment or Replacement

    Someone backed the car in a little too far, a bin or a bicycle brushed the track, and since then the door starts to close and comes back up.

Springs & Hardware

New Doors

Installation & Upgrades

Replacing a worn door with a similar one is straightforward. Replacing it with something better, whether that is warmer, quieter, brighter or simply better looking, is where the installation and upgrade services earn their place.

Closed white sectional garage door at an ordinary brick house. — Sectional Garage Door Replacement, Aurora
Vertical tracks extend above a closed garage door before curving near a high ceiling, while a person looks upward. — High-Lift Garage Door Conversion, Aurora
Person holding a multimeter and a red probe near the exposed circuit board of an overhead garage-door opener. — Garage Door Opener Diagnosis and Repair, Aurora

Openers

Openers & Access

Chain-Drive Opener Repair

Halfway up, the door lurches. Something in the drive skips a beat, the chain jumps, and the door finishes its travel with a jolt.

Belt-Drive Opener Repair

Press the remote and the motor runs its full cycle, lights on, the usual whir, but the door does not move a centimetre. Up at the trolley, the belt is hanging loose where a small plastic clip used to hold it.

Garage Door Opener Replacement

The remotes only work from the end of the driveway now, and one of them disappeared with a set of keys last month. Inside the remote are tiny switches instead of a learn button, so excluding the missing one means resetting the switch pattern on every remote and the receiver.

Photo-Eye Sensor Alignment or Replacement

Someone backed the car in a little too far, a bin or a bicycle brushed the track, and since then the door starts to close and comes back up. One sensor now sits at a slightly different angle from the other.

Garage Door Remote and Keypad Programming

The opener is an older one with a row of tiny switches inside the remote. The last remote finally died, the maker stopped selling that model years ago, and the door itself still runs perfectly from the wall button.

Smart Garage Controller Setup

There is a wireless symbol printed on the opener above the car, and the manual mentions an app, but the head unit has never been connected to anything. You downloaded the app once, it asked for a serial number and a network, and the moment passed.

Emergency Release Repair

It is the coldest morning of the year. A week of slush and road salt has crusted over the outside release lock, the key will not seat, and the opener inside is silent after the overnight outage.

Which fix fits?

You are building a house and the garage opening is framed.

Sensible optionNew-construction door installation.

WhyWe coordinate with the framer on headroom, side room and the opener outlet before the door arrives.

You want a car hoist and the door track is in the way.

Sensible optionHigh-lift conversion.

WhyRerouted tracks and a jackshaft opener move the open door up near the ceiling.

The garage ceiling is too low for standard tracks.

Sensible optionLow-headroom track kit.

WhyDouble tracks and a modified spring setup let the door open in tight spaces.

After an overnight freeze the door stuck to the slab, the opener strained, and something gave.

Sensible optionGarage Door Panel Replacement

WhyWinter is hard on the bottom section.

After a spring rain there is a puddle inside the door that reaches the tires.

Sensible optionGarage Door Bottom Seal Replacement

WhyWhat you have afterwards is a door that closes onto a single soft line of contact from jamb to jamb.

A length of weatherstrip along the right jamb has pulled away, nails and all, and it slaps against the trim every time the wind picks up.

Sensible optionGarage Door Perimeter Weatherstrip

WhyWinter is what wears a perimeter seal out here.

How a visit goes

Describe the property, the hardware and what has changed, and the visit starts from what you have seen.

  1. 01

    Set a time

    We arrange a visit around your day and confirm the technician's arrival. If the door is stuck open, tell us so we can plan for it.

  2. 02

    A full walkaround

    Nothing is replaced until the whole door has been inspected. We photograph wear where useful so you can see what we are describing.

  3. 03

    Done and demonstrated

    The door is repaired, run through its cycles, and demonstrated to you. We leave the old parts if you want to see them.

York, Ontario

Aurora information

Town
Aurora, York, Ontario
In business
21 years
Hours
Open 24/7

Nearby areas

    2021 Census

    What it means at the door

    About 22% of homes in Aurora were built in 1980 or earlier, according to the 2021 Census.

    Newer homes

    Where houses are newer, driveways slope up to the door and the apron is smooth, so the bottom seal usually meets the floor evenly. Seal work here is more about replacing a section cracked by winter salt than about closing a gap, and it is a small, worthwhile job.

    Single-detached houses make up about 60% of homes in Aurora (2021 Census).

    Mostly houses

    In a neighbourhood of houses, each garage door is chosen by the household, so styles vary from one driveway to the next. When it is time for a new door, homeowners pick panel design, windows, colour and insulation freely, and we bring samples to compare against the siding.

    Source: Statistics Canada, 2021 Census of Population.

    Homeowners ask

    Questions · (289) 802-2396

    What makes a cable fray?

    Fraying is individual wires breaking, and it comes from two things: bending fatigue where the cable wraps the drum or pulley, and rubbing where it touches something it should not, such as a bent track edge, a rough drum groove, a seized pulley or a bracket sitting crooked after a bump. Corrosion speeds both. The technician looks for the rough edge so the new cable does not meet it.

    Is cable work different on a door with extension springs?

    The idea is the same and the route is different. Instead of winding onto a drum, the cable runs from the bottom bracket up over a pulley at the front of the track, back over a pulley on the spring, and to an adjusting clip. The technician relaxes the springs by opening and clamping the door, replaces worn pulleys along with the cable, sets both clips the same, and confirms a containment cable runs through each spring.

    Can I lift the door by hand while a cable is off?

    Leave it. With one cable slack the door is being carried on one side only, so it is unbalanced and may bind or drop unevenly when moved. The technician arrives with clamps and a method for taking the door's weight before anything is moved, and that is the moment to lift it. Until then a stationary door is exactly what you want.

    How long does a sensor visit take?

    Alignment, cleaning and a bracket adjustment are done inside an hour on most doors, including the two tests at the end. Replacing the pair adds a little for wiring and setup. Re-running the wire all the way from the motor to both sensors is the part that stretches a visit, especially where the wire is behind a finished ceiling or the garage is full. Having the floor by the door clear before arrival helps.

    How often should the springs be lubricated, and with what?

    Once or twice a year is a good rhythm, with autumn the most useful time because cold thickens grease. Use a garage-door lubricant, typically a silicone or lithium spray, applied along the coils so it works between them as the door cycles. Hinges, roller bearings and the end bearings benefit from the same treatment. Keep the track itself dry, since lubricant there gathers grit and slows the rollers.

    Request a visit

    Our way of working in Aurora is simple. Listen to what you noticed, inspect the door from the bottom seal to the header, explain the cause in ordinary words, and offer the sensible options with their prices, on site, before the work begins. Parts that still have life in them are left alone.

    Call

    (289) 802-2396

    Open 24/7

    Call(289) 802-2396

    Request a visit

    Or call (289) 802-2396 · open 24/7